Call Toll Free - 888-670-1195
2018 Skyjack SJ1056 Image
Stock Number: EQC012374
Make: Skyjack
Model: SJ1056
Year: 2018
2018 Skyjack SJ1056 Details
2015 Terex CTT 121A-5 TS16 Image
Stock Number: 600017
Make: Terex
Model: CTT 121A-5 TS16
Year: 2015
2015 Terex CTT 121A-5 TS16 Details
2007 Potain HDT80 Image
Stock Number: 600194
Make: Potain
Model: HDT80
Year: 2007
2007 Potain HDT80 Details
2013 Hyundai 110D-7E Image
Stock Number: EQU010604
Make: Hyundai
Model: 110D-7E
Year: 2013
2013 Hyundai 110D-7E Details
2012 Miller Big Blue 400D Image
Stock Number: 231276
Make: Miller
Model: Big Blue 400D
Year: 2012
2012 Miller Big Blue 400D Details
2008 Combilift C12000SL Image
Stock Number: EQU008108
Make: Combilift
Model: C12000SL
Year: 2008
2008 Combilift C12000SL Details
 
Manitou Forklifts New York top

Manitou Forklifts New York

Frequent inspections can really help to reduce forklift maintenance and save you copious amounts of money in the long-run. The standing joke in the industry is a lift truck technician coining the saying "Pay me now, or pay me later," because it usually costs more to procrastinate when it comes to lift trucks. Like for instance, the minor fixes which are not repaired can later turn into costly repairs.

Tilt Cylinders
If they are left unchecked, oil leaks are a very serious issues. On a regular basis, the equipment must be checked for damage and/or oil leaks. Oil leaks can lead to really dangerous uncontrolled movement of the mast. Whether the leaks are in the cylinder or outside, the outcome could lead to cylinder drift and loss of vital fluid. When damage or leaks are detected, you normally would have to replace the seals or the entire cylinder assembly.

Chains
Be sure to pay attention as you don't want mast lift chains to stretch beyond acceptable limits. Look carefully for any signs of damage or wear and tear. Check regularly with a chain wear gauge so as to monitor the wear. If the chain is worn beyond 2 percent or rusted, it is time to replace the chain. Following these tips would help keep your equipment functioning optimally.

Mast
The mast needs to be moving smoothly down and up when operating the lift control lever. Be sure to check to see if the mast is tilting forwards and backwards in a smooth manner. You might need to lubricate the mast strip sliding surfaces if the sliding surfaces are binding. Lubricate their fittings also, as there is a fitting located on either side of the inner mast. The lift bracket side rollers are one more lubrication spot.

Forks
Check the forks and check for cracks, damage and wear. It is vital to remember that cracked or worn blades can possibly fail without any warning. Any fork damage of course means immediately taking the truck out of service. If the cracks are deeper than just on the surface, they should be replaced since they really can't be safely repaired.

  • Nissan Forklifts New York
    Over the past century, lift trucks became really popular with the advancement of technology. The need for supplies to be transported grew rapidly and the volumes of products handled by industries increased greatly. The lift... More
  • Caterpillar Forklifts New York
    Driving a forklift is a lot more complicated compared to driving a vehicle. A forklift operator must be highly trained and skilled in the operation of a forklift. Operating a forklift requires a high level... More
  • Mitsubishi Forklifts New York
    Lifts are work platforms that are utilized to lower and raise people, supplies and tools for loading and work positioning. These pieces of machinery are usually utilized in automotive, construction, telecommunications, power and electrical service,... More
  • Daewoo Forklifts New York
    Start-up of the forklift business A national expansion of the industrial equipment industry was encouraged by Korea during the late 1960s. At that time, the forklift market in Korea was an open-import situation. Korea Machinery... More
  • Taylor Forklifts New York
    Lift trucks or forklifts are powered industrial trucks that are usually utilized in the transportation and lifting of materials for different applications. These equipment are usually used in the construction, mining, dockside and warehousing operations.... More
  • Kalmar Forklifts New York
    Kalmar by Cargotec has a lot of container handler or ship-to-shore solutions used in numerous global ports and terminals. They are a leader in energy efficiency and automation in handling containers in many port locations.... More
  • Hyster Forklifts New York
    The comprehensive and responsive "after-sale" support offered by Hyster is the most thorough within the material handling industry. Nothing adds more value to your new Hyster lift truck than acquiring this support. Like for instance,... More
  • Yale Forklifts New York
    Overview Determine which forklift is right for you and your business by taking the time to do your research. This could potentially save you or your company lots of money. Figuring out different financial options,... More
Manitou Forklifts New York

Short Story: