Call Toll Free - 888-670-1195
2018 Skyjack SJ1056 Image
Stock Number: EQC012374
Make: Skyjack
Model: SJ1056
Year: 2018
2018 Skyjack SJ1056 Details
2015 Terex CTT 121A-5 TS16 Image
Stock Number: 600017
Make: Terex
Model: CTT 121A-5 TS16
Year: 2015
2015 Terex CTT 121A-5 TS16 Details
2007 Potain HDT80 Image
Stock Number: 600194
Make: Potain
Model: HDT80
Year: 2007
2007 Potain HDT80 Details
2013 Hyundai 110D-7E Image
Stock Number: EQU010604
Make: Hyundai
Model: 110D-7E
Year: 2013
2013 Hyundai 110D-7E Details
2012 Miller Big Blue 400D Image
Stock Number: 231276
Make: Miller
Model: Big Blue 400D
Year: 2012
2012 Miller Big Blue 400D Details
2008 Combilift C12000SL Image
Stock Number: EQU008108
Make: Combilift
Model: C12000SL
Year: 2008
2008 Combilift C12000SL Details
 
Caterpillar Forklifts New York top

Caterpillar Forklifts New York

Driving a forklift is a lot more complicated compared to driving a vehicle. A forklift operator must be highly trained and skilled in the operation of a forklift. Operating a forklift requires a high level of attentiveness. The Occupational Safety and Health Administration reports that 85 people die in forklift-related mishaps per year. Around 35,000 people are hurt every year in lift truck mishaps. Nearly half of operator deaths are caused by a lift truck tip over.

To prevent tip overs, it is important that operators know how to correctly estimate the weight of a load. In the construction industry, the weight of a load is normally posted right on the load. If the load consists of cubes containing 90 concrete blocks and a concrete block weighs 16 kilograms, the whole weight of the load would be approximately 1,360 kilograms. If a load is wet, the driver must take additional weight into consideration.

It is dangerous for drivers to make poorly informed guesses about the real load weight and whether the lift truck can handle it. If an operator cannot be sure about the load weight, he should request assistance from the supervisor.

Failure to pull up near enough to a building or lift a load utilizing an extended boom can be another cause of tip overs. To avoid tipping lift truck, it is essential to use the load chart. Even when a forklift does not actually tip over, a mishap has occurred whenever the back wheels come off the ground. This means the limitations of the forklift have been exceeded. Though damage may not be obvious, the back axle can have sustained broken upon hitting the ground.

It is even possible for forklifts to tip even when not carrying a load. Unloaded forklifts could tip just after a driver has placed a load on scaffolding using an extended boom. If the operator reverses the forklift and turns suddenly while bringing the boom down, the center of gravity would be pushed to the edges of the forklift and could result in a tip over. A driver must always use the joysticks to be able to retract and lower the fork.

  • Nissan Forklifts New York
    Over the past century, lift trucks became really popular with the advancement of technology. The need for supplies to be transported grew rapidly and the volumes of products handled by industries increased greatly. The lift... More
  • Liftking Forklifts New York
    The forklift manufacturer Manitex LiftKing is major North American maker of material handling products. Their complete lineup of machines include: Transporters, RT Lift Trucks, Steel Mill Equipment and Special Mission Oriented Vehicles that are really... More
  • Mitsubishi Forklifts New York
    Lifts are work platforms that are utilized to lower and raise people, supplies and tools for loading and work positioning. These pieces of machinery are usually utilized in automotive, construction, telecommunications, power and electrical service,... More
  • Daewoo Forklifts New York
    Start-up of the forklift business A national expansion of the industrial equipment industry was encouraged by Korea during the late 1960s. At that time, the forklift market in Korea was an open-import situation. Korea Machinery... More
  • Taylor Forklifts New York
    Lift trucks or forklifts are powered industrial trucks that are usually utilized in the transportation and lifting of materials for different applications. These equipment are usually used in the construction, mining, dockside and warehousing operations.... More
  • Kalmar Forklifts New York
    Kalmar by Cargotec has a lot of container handler or ship-to-shore solutions used in numerous global ports and terminals. They are a leader in energy efficiency and automation in handling containers in many port locations.... More
  • Hyster Forklifts New York
    The comprehensive and responsive "after-sale" support offered by Hyster is the most thorough within the material handling industry. Nothing adds more value to your new Hyster lift truck than acquiring this support. Like for instance,... More
  • Yale Forklifts New York
    Overview Determine which forklift is right for you and your business by taking the time to do your research. This could potentially save you or your company lots of money. Figuring out different financial options,... More
Caterpillar Forklifts New York

Short Story: