Call Toll Free -  888-670-1195
Stock Number: 230463
Make: Magnum
Model: MLT5080
Year: 2008
Stock Number: EQC009931
Make: Hyster
Model: H1050E
Year: 2001
Stock Number: EQC009533
Make: TCM
Model: FG25T3
Year: 2013
Stock Number: EQU005204
Make: Genie
Model: GTH844
Year: 2011
Stock Number: EQC006144
Make: GNB Industrial Power
Model: GTCII18-1200T1
Stock Number: 212328
Make: JLG
Model: G10-55A
Year: 2014
 
Used Taylor Forklifts - Inventory New York top

Used Taylor Forklifts - Inventory New York

Taylor's TX Series of Industrial lift trucks have been designed and engineered to place greater emphasis on the operators comfort. The TX Series provides basic features like more leg room and head room, shock mounted center mounted operator station, tilt steering wheel, CANbus technology for operator comfort and convenience and increased leg and head room, in addition to fingertip electric joystick controls. The TX Series is offered in 5 various wheel bases, so there is definitely a particular unit right for your specific use.

All of the controls on the machinery are integrated using solid state controllers with J1939 CANbus technology. This configuration allows controllers and sensors the ability to communicate with less wiring between the components. Like for example, I/O modules are chosen to add consistency to the equipment control system and utilized to eliminate electromechanical relay devices.

Located in each cab is the main color display which access the info from the J1939 CANbus technology. This display shows engine data together with warnings, spreader status lights and man and machine interface data. The equipment functions can be tuned through the main display in the cab. Furthermore, the display allows service personnel to access information needed during troubleshooting. Like for example, information such as controller outputs and sensor status. In order to prevent operator access, the tuning functions are password protected.

The TX Series lift trucks have all been outfitted with an electronic turbocharged Tier Certified Cummins, which is a charge air to air or after-cooled diesel engine. Among the basic engine features comprise water/fuel separator, transmission/engine protection systems, maintenance monitor, electronic diagnostic monitor, improved fuel economy and reduced emissions.

The TX Series has a transmission which is a 3-speed, modulated powershift, fully reversing transmission. The inching powershift transmission and the electric roll shift control as well as a separate air-to-oil cooler. All of these features add up to an effective and strong equipment that is extremely dependable on the job location.

Taylor THD160
The THD160 model in New York is manufactured by the company Taylor is a two wheel drive lift truck. This unit has a diesel powered engine and has the capability to lift a max weight of 16000 lbs.
Taylor Y36WOS
The Y36WOS model in New York is produced by the company Taylor is a two wheel drive lift truck. This model has a diesel powered engine and has the capability to lift a maximum of 36000 lbs.
Taylor THDC 954
The Taylor THDC 954 model in New York is a diesel powered two wheel drive lift truck. This model has the ability to lift up to 950000 lbs and employs a straight boom, which has a lifting height of 460 feet.
Taylor GT330
The GT330 in New York is built by the company Taylor is a two wheel drive lift truck. This unit has a diesel powered engine and has the capability to lift a maximum of 33000 pounds.
Taylor THDC955
The Taylor THDC955 in New York is ideally suited for a wide variety of tasks. The THDC955 is two wheel drive with a straight boom that allows for a lifting height of 576 ft and a lifting capability of 95000 lbs.
Taylor TXH300KS
The TXH300KS unit in New York is produced by the company Taylor is a two wheel drive lift truck. This model has a diesel powered engine and has the capability to lift a maximum weight of 30000 lbs.

Buying Tips There are actually lots of factors to take into consideration when buying a forklift. Choosing the best equipment can have a huge effect on everything from productivity to operating expenses, to machine downtime and worker morale...

Narrow Aisle Forklifts Some lift trucks are particularly made to fit down very narrow aisles inside a warehouse. These units are referred to as narrow aisle lift trucks...

It doesn't matter what kind of business in particular you have, if there are equipment or components which need to be transported, it is absolutely necessary to have a forklift...
Used Taylor Forklifts - Inventory New York bottom left Used Taylor Forklifts - Inventory New York bottom left