Most of the time, companies would spend a lot of money to purchase their forklifts. It is important, therefore to take proper care of your equipment to protect your investment into the long run. It is a great idea to know the procedures that are carried out in the maintenance and care of this piece of equipment.
Among the best ways to tell how good the engine is working is by starting the forklift up and listening closely to see how it runs. For instance, if there are any misses or knocks, the equipment is faulty and this should raise several issues. Moreover listen closely for any squealing noise which come from the belts because these sounds will provide you with a wealth of information.
Some of the main parts needing attention during maintenance comprise the horn, safety warning devices, gauges, the overhead guard and the lights. Any burnt out light bulbs or faulty components need to be replaced as soon as they are noticed. It is also vital to check the wiring.
When the above parts have been inspected thoroughly, proceed to the battery compartment to be able to see if the terminals are clean. If the terminals are not clean, be sure to clean them properly. Every battery cell should be checked in order to make certain that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machinery and then change the filters. The hydraulic filter, the transmission filter and the fuel filters must be frequently replaced. Before fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
Once the oil change has been completed and new filters have been fitted, visually inspect the drive axle from beneath the machine. Be sure to grease the axle if there is any grease fitting. Check the belts on the engine for any cracks or frays. If you find any, fix the issue accordingly. Afterwards, check every other component of the equipment including the wheels. If any kind of problem or fault is detected, be certain to deal with it immediately in order to make certain the equipment is working at its safest and optimum levels.