Stock Number: EQU005626
Make: Hyster
Model: S50FT
Year: 2013


Stock Number: 208605
Make: Hyundai
Model: 25LC-7M
Year: 2015


Stock Number: 2-16-230415
Make: Terex-Comedil
Model: CTT331-16 TS23
Year: 2008


Stock Number: 212535
Make: JLG
Model: 1932RS
Year: 2014


Stock Number: 2-18-UEATT-93
Make: Misc
Model: TIRES


Stock Number: 301410
Make: Capacity
Model: TJ7000
Year: 2005


Stock Number: 202750
Make: Jungheinrich
Model: EKS 314
Year: 2005


Stock Number: 2-16-261627
Make: Potain
Model: IGO50
Year: 2006


Stock Number: 2-16-230392
Make: Terex-Comedil
Model: CTT231-10 TS23
Year: 2008


Stock Number: 206419
Make: Jungheinrich
Model: ETR345-36V
Year: 2012


Stock Number: UEF82
Make: Misc
Model: FORKS
Year: 2013


Stock Number: 2-18-UEATT-97
Make: Misc
Model: CLAMP


 
Daewoo Propane Forklifts

Daewoo Propane Forklifts

Change a Propane Tank
Propane powered forklifts are frequently used inside warehouses. The forklift is made with the propane tank mounted at the rear of the operator. The tanks, which look a lot like beer kegs, have to be replaced from time to time as they have a limited lifespan. Drivers of forklifts should use care when handling propane tanks. Compressed gases are really hazardous, particularly because the gas is flammable. Always use care when replacing and removing propane tank to prevent injury.

1 To change a propane tank, first stop the forklift while leaving the engine running, and turn off the valve on the tank. Let the forklift run until the engine dies. This procedure burns off the gas in the transfer hose that connects the tank and the engine. Before taking the next steps, put on the correct safety equipment, like insulated gloves made of either neoprene or leather. It is essential for you to protect your skin from touching the compressed gas, that is very cold.
2 The hose of the tank has to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, tighten the nut to reattach the holding straps and to reattach the hose at the valve of the tank.
3 Leaks could be checked simply by applying soapy water to the valve and opening it slightly. If there is a leak, it would cause bubbles to froth from around the valve. If this occurs, check the valve area and the connection hose at the nut. The connecting nut should be re-tightened if you detect any leaks in the area of the valve, and after that do the leak checking procedure once more. Persistent leaks mean that both the nut and connecting hose will have to be replaced. Nonetheless, if replacing the hose and nut still does not stop the leak, the tank should be replaced.
4 Finally, open the valve all the way to allow the gas to fill the connecting hose. After that you can start the forklift and continue working.

  • Skyjack Knuckle Boom Lifts
    Boom Truck Boom trucks are somewhat like cranes and could be equipped with a winch for lifting. This will depend on the size and weight ... More
  • Daewoo Gas Forklifts
    Dangers of Type-G lift trucks The lift truck is essential for completing warehouse tasks. These extremely capable equipment raise and ... More
  • Nissan Warehouse Forklifts
    The platform forklift is popular in a huge variety of construction and industrial operations. Utilizing these equipment could help to ... More
  • Taylor Container Handlers
    Empty Container Handler Capacity 9000 Kilograms Taylor is the proud owner of an impressive Empty Container Handling truck variety. The ... More
  • CAT Container Forklift
    In order to efficiently handle empty and laden containers for stacking safely, or loading and unloading between road truck, barge, ... More