Stock Number: 232206
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013

Stock Number: 2-16-268337
Make: Terex-Comedil
Model: CTT561/A-32 HD23
Year: 2003

Stock Number: 231105
Make: Magnum
Model: MLT5200
Year: 2011

Stock Number: 2-18-UEF3
Make: Misc
Model: FORKS

Stock Number: EQU005191
Make: Genie
Model: GTH1056
Year: 2011

Stock Number: EQU001420
Make: Mitsubishi
Model: FG25N-LE
Year: 2012

Stock Number: 301144
Make: CAT
Model: DP80
Year: 1994

Stock Number: 208380
Make: CAT
Model: GC55K
Year: 2015

Stock Number: 301398
Make: Capacity
Model: TJ7000
Year: 2004

Stock Number: 205774
Make: CAT
Model: E5000-AC
Year: 2011

Stock Number: EQU006744
Make: Hyundai
Model: 25D-9
Year: 2016

Stock Number: 232060
Make: Magnum
Model: MLT4060
Year: 2013

Comedil Tower Cranes

Comedil Tower Cranes

When looking out over any bigger city skyline, you are likely to see tower cranes constructed near skyscrapers and tall buildings. These big, remarkable structures are normally described as a central shaft that has counterweights and a long boom utilized to balance the load of the crane. There are numerous models of tower crane types. These lattice-woven structures are available for particular uses. Some popular types consist of top-slewing, self-erecting and bottom-slewing units. Slewing means turning around a fixed point. The main type of top-slewing tower crane which is utilized in construction nowadays is the horizontal boom. These eye-catching structures are found throughout the globe.

How to Erect a Tower Crane
A tower crane is common on construction locations to transport supplies from high to low places and vice versa. These machines are used in environments where a wheel-mounted crane is not large enough to carry out the work, like on high-rise structures. Just skilled professionals should be the ones to erect a tower crane. To be able to keep everybody safe, this job needs to be performed by professionals. There is a high risk of collapse, that could cause extensive damage and loss if you try to built it yourself with hardly any experience.

In preparation of building the crane, an excavator is used to dig out a big pit that is used for the base of the crane. The hole is then filled with concrete. Steel anchors are set into the concrete, and next, the first section of the crane's mast is attached. The concrete is required to cure for 24 hours.

The first mast part could be bolted to the anchors, when the base has finally set. By utilizing your spirit level, one could ensure that the mast is vertical. Afterwards, fix another section of the mast by first using bolts and keep repeating this method until your desired height has been attained. It would be necessary to utilize a scissor lift or a telescoping boom in order to perform this step.

  • Skyjack Knuckle Boom Lifts
    Boom Truck Boom trucks are somewhat like cranes and could be equipped with a winch for lifting. This will depend on the size and weight ... More
  • Daewoo Gas Forklifts
    Dangers of Type-G lift trucks The lift truck is essential for completing warehouse tasks. These extremely capable equipment raise and ... More
  • Nissan Warehouse Forklifts
    The platform forklift is popular in a huge variety of construction and industrial operations. Utilizing these equipment could help to ... More
  • Taylor Container Handlers
    Empty Container Handler Capacity 9000 Kilograms Taylor is the proud owner of an impressive Empty Container Handling truck variety. The ... More
  • CAT Container Forklift
    In order to efficiently handle empty and laden containers for stacking safely, or loading and unloading between road truck, barge, ... More