Stock Number: 208605
Make: Hyundai
Model: 25LC-7M
Year: 2015


Stock Number: EQU004981
Make: CAT
Model: TH514
Year: 2012


Stock Number: 232197
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013


Stock Number: 232157
Make: WackerNeuson
Model: WK HI400HD D
Year: 2013


Stock Number: 301431
Make: Capacity
Model: TJ7000
Year: 2005


Stock Number: 301550
Make: Mitsubishi
Model: FG25N-LE
Year: 2012


 
Manitou Forklifts New York

Manitou Forklifts New York

Frequent inspections can really help to reduce forklift maintenance and save you copious amounts of money in the long-run. The standing joke in the industry is a lift truck technician coining the saying "Pay me now, or pay me later," because it usually costs more to procrastinate when it comes to lift trucks. Like for instance, the minor fixes which are not repaired can later turn into costly repairs.

Tilt Cylinders
If they are left unchecked, oil leaks are a very serious issues. On a regular basis, the equipment must be checked for damage and/or oil leaks. Oil leaks can lead to really dangerous uncontrolled movement of the mast. Whether the leaks are in the cylinder or outside, the outcome could lead to cylinder drift and loss of vital fluid. When damage or leaks are detected, you normally would have to replace the seals or the entire cylinder assembly.

Chains
Be sure to pay attention as you don't want mast lift chains to stretch beyond acceptable limits. Look carefully for any signs of damage or wear and tear. Check regularly with a chain wear gauge so as to monitor the wear. If the chain is worn beyond 2 percent or rusted, it is time to replace the chain. Following these tips would help keep your equipment functioning optimally.

Mast
The mast needs to be moving smoothly down and up when operating the lift control lever. Be sure to check to see if the mast is tilting forwards and backwards in a smooth manner. You might need to lubricate the mast strip sliding surfaces if the sliding surfaces are binding. Lubricate their fittings also, as there is a fitting located on either side of the inner mast. The lift bracket side rollers are one more lubrication spot.

Forks
Check the forks and check for cracks, damage and wear. It is vital to remember that cracked or worn blades can possibly fail without any warning. Any fork damage of course means immediately taking the truck out of service. If the cracks are deeper than just on the surface, they should be replaced since they really can't be safely repaired.

  • Toyota Forklifts New York
    Toyota lift trucks can fill nearly each and every one of your material handling requirements from improved ergonomics, better ... More
  • Komatsu Forklifts New York
    Fleet managers could plan for the unplanned, ramp up on safety measures and overall productivity and lessen costs with several simple ... More
  • Liftking Forklifts New York
    The forklift manufacturer Manitex LiftKing is major North American maker of material handling products. Their complete lineup of ... More
  • Caterpillar Forklifts New York
    Driving a forklift is a lot more complicated compared to driving a vehicle. A forklift operator must be highly trained and skilled in ... More
  • Taylor Forklifts New York
    Lift trucks or forklifts are powered industrial trucks that are usually utilized in the transportation and lifting of materials for ... More
  • Daewoo Forklifts New York
    Start-up of the forklift business A national expansion of the industrial equipment industry was encouraged by Korea during the late ... More
  • Xtreme Telehandlers New York
    The XR842 roller boom telehandler has a forward reach of 28 feet, 10 inches, a lift height of 41 feet, 5 inches and a lift capacity of ... More
  • Hyster Forklifts New York
    The comprehensive and responsive "after-sale" support offered by Hyster is the most thorough within the material handling industry. ... More

Manitou Forklifts New York

Short Story: